Flash纯脚本生成饼图

先发效果，效果有参考一下国外的饼图，不过他的代码，注释等我也看不懂，英文不懂，所以我就写个中文的好了。大家完全可以根据我的代码改出更多的效果来。

编程水平有限，大家谅解一下，不过能正常运行。
http://www.blueidea.com/articleimg/2007/03/4540/ok.swf

数据来源于xml配置文件，可以直接修改xml文件以达到直接使用的目的。默认数据来源为piedata.xml但是可以在页面中修改这个数据来源。如下：
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0" width="600" height="600">
  <param name="movie" value="ok.swf?piedata=piedata.asp" />
  <param name="quality" value="high" />
  <embed src="ok.swf?piedata=piedata.asp" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="600" height="600"></embed>
</object>

在代码中swf文件名后加上参数?piedata=piedata.asp则可以修改数据来源为piedata.asp。

其实原理也不难，先画个圆（扇形）做上表面，然后分别画出两个侧面和一个曲面，最后画底下的圆（扇形）。一个立体的小扇形就出来了。让他们一起拼在一起就成了饼图嘛。只有一点比较烦就是确定每一个扇形的深度，好让他们在视学上看起来处于正常的前后关系位置。在这儿，我想了一个法子。
先算出当前扇形的中间度数，看这个度数是否在水平线以下，是的话就看这个度数与垂直方向的角度，角度最小的在最前面，最大的在最后面，如果中间度数在水平线以上，那么则与中间度数在水平线以下的相反。这儿要注意的是必须要从正上方作为0度，开始计算。

下面是源文件，所有代码放到影片的时间轴上的一帧中就可以了。

代码拷贝框
//缩放舞台并不缩放内容，将内容定位于舞台的左上角; Stage.align = "TL"; Stage.scaleMode = "noScale"; _quality = "BEST"; import mx.transitions.Tween; import mx.transitions.easing.*; //全局 //所有数据 var pie_num:String = "20,15,8,50,55,100,100,190"; //所有数据名称 var pie_name:String = "四川,重庆,云南,贵州,山西,湖南,上海,北京,广州"; //是否显示数据名称与百分比值 var show_name:String = "true,false,false,true,false,true,true,true" //所有颜色 var colorstr:String = "0xFF0F00,0xFF6600,0xFF9E01,0xFCD202,0xF8FF01,0xB0DE09,0x04D215,0x0D8ECF,0xFF1F11"; //所有开始位置 var defaultsate:String = "false,false,false,false,false,false,false,true"; //公共变量 x0 = 210;//圆点坐标x(数字) y0 = 135;//圆点坐标y(数字) z = 150;//圆长轴(>0) d = 90;//圆短轴(>0) w = 150;//环宽(>0,<长轴) h = 20;//饼高(>=0) movew = 15;//移动距离(>0) alpha = 100;//点击之后的透明度(0-100) mcalpha = 100;//默认所有开始透明度(0-100) showorder = true;//是否显示竖向排列表(true,false) orderx = 400;//竖向排列表起始x(数字) ordery = 70;//竖向排列表起始y(数字) orderxy = 6;//竖向排列表竖向间隔(>0) linecolor = 0xcccccc;//指示线颜色(十六进制颜色) linealpha = 100;//指示线透明度(0-100) titleline = 20; //指示线长度(>0 || 0<) fontcolor = 0xFF0000;//文字颜色(十六进制颜色) percentshow = "font";//是否显示百分值四个值（font文字,num百分值,all都显示,none不显） orderfontcolor = 0x222222;//左边竖向排列文字颜色(十六进制颜色) dark = 1.43;//深色系数（>1如1.43默认） //以下为三个饼图示例 //第一个参数为影片名，第二个为深度群 drawpie("amu",1, pie_num,pie_name,titleline,linecolor,linealpha,orderfontcolor,percentshow,fontcolor,colorstr,defaultsate,show_name, x0,y0,z,d,w,h,movew,alpha,mcalpha,dark, showorder,orderx,ordery,orderxy); drawpie("vapr",2, "15,30,60,90","<b>好</b>,不好,一般,差,太差了",0,0xcccccc, 0,0x000000,"all",0x666666,"0x0D8ECF,0x04D215,0xB0DE09,0xF8FF01,0xFF9E01,0xFF6600,0xFF1F11","true,true,false,false","true,true,true,false", 160,380,70,70,50,2,15,100,100,1.5, true,20,340,13); drawpie("kiss",3, "30,50,290,70,50,10","Flash,Html,Javascript,Asp,PHP,C#",10,0x999999,100,0x000000,"none",0xff6600,"0x0D8ECF,0x04D215,0xB0DE09,0xF8FF01,0xFF9E01,0xFF6600,0xFF1F11","false,false,false,false,false,false,false","false,false,false,false,false,false,false", 470,300,100,60,60,20,15,50,100,1.15, false,280,250,28); drawpie("kisss",4, "242,332,171,116,106,224","Flash,Html,Javascript,Asp,PHP,C#",10,0x999999,100,0x000000,"all",0xff6600,"0x0D8ECF,0x04D215,0xB0DE09,0xF8FF01,0xFF9E01,0xFF6600,0xFF1F11","false,false,false,false,false,false,false","true,true,true,true,true,true,true", 370,520,60,40,40,10,15,50,100,1.15, true,515,480,3); function drawpie(mcname:String, depth:Number, pie_num:String, pie_name:String, titleline:Number, linecolor:Number,linealpha:Number, orderfontcolor:Number,percentshow:String, fontcolor:Number, colorstr:String, defaultsate:String, show_name:String, x0:Number, y0:Number, z:Number, d:Number, w:Number, h:Number, movew:Number, alpha:Number, mcalpha:Number, dark:Number, showorder:Boolean, orderx:Number, ordery:Number, orderxy:Number):Void{ arr_n = pie_num.split(","); arr_total=0; for(m=0;m<arr_n.length;m++){ arr_total+=Number(arr_n[m]); } var arr_name = new Array(); arr_name = pie_name.split(","); var arr_showname = new Array(); arr_showname = show_name.split(","); var arr_num = new Array(); var arr_percent = new Array(); duof = 0; for(m=0;m<arr_n.length;m++){ if(m==arr_n.length-1){ duo = 360-duof; arr_num[m]= duo.toString(); }else{ duo = Math.round((Number(arr_n[m])*360)/arr_total); duof = duof+duo; arr_num[m]= duo.toString(); } arr_percent[m] = Math.round((Number(arr_n[m])*100)/arr_total*100)/100; } //分割数据 var arr_color = colorstr.split(","); var arr_defaultstate = defaultsate.split(","); //所有扇环的中间度 var arr_middle:Array = new Array(); //生成所有的扇环的中间度，用来确定深度 var xx:Number=-90; var arr_a:Array = new Array();//记录每一扇环的开始度与结束度 for(m=0; m<arr_num.length;m++){ a0=xx; a=Number(a0)+Number(arr_num[m]); arr_a.push([a0,a]); xx=a; if(a-a0>180){ arr_middle[m] = 0.001; }else{ if((a-a0)/2+a0<=180 && (a-a0)/2+a0>=0){ //本mc的中间角度与90度的差值（这儿我们确定谁与90度差值的绝对值最小就排在最前面） arr_middle[m] = Math.abs(90-((a-a0)/2+a0)); }else if((a-a0)/2+a0>180 && (a-a0)/2+a0<=270){ arr_middle[m] = (Math.abs((a-a0)/2+a0-180)+500); //本mc的中间角度与180度的差值（这儿我们确定谁与90度差值的绝对值最大就排在最前面） }else if((a-a0)/2+a0>=-90 && (a-a0)/2+a0<0){ arr_middle[m] = (Math.abs((a-a0)/2+a0-360)+500); //本mc的中间角度与270度的差值（这儿我们确定谁与90度差值的绝对值最大就排在最前面） } } //trace(m+":"+arr_middle[m]); } //trace(arr_a[0][0]); //扇环排序 arr_middle = arr_middle.sort(Array.NUMERIC|Array.RETURNINDEXEDARRAY);//重排序，让原来的数组值从小到大排列，但数组的索引不变。 //arr_middle.reverse(); // for(m = 0; m<arr_middle.length; m++){ //绘出竖向方块链接------------------------------------------------------------------------ if(showorder){ _root.createEmptyMovieClip(mcname+arr_middle[m]+"icon_mc",(5-m)*22+depth*10+1); mc = this[mcname+arr_middle[m]+"icon_mc"]; color = parseInt(arr_color[arr_middle[m]]); beginx = orderx; beginy = ordery; jianxy = orderxy+12; mc.beginFill(color, 100); mc.lineStyle(1, darkcolor(color,dark), 100, true, "none"); mc.moveTo(beginx,arr_middle[m]*jianxy+beginy); mc.lineTo(beginx+12,arr_middle[m]*jianxy+beginy); mc.lineTo(beginx+12,arr_middle[m]*jianxy+beginy+12); mc.lineTo(beginx,arr_middle[m]*jianxy+beginy+12); mc.endFill(); var label:TextField = mc.createTextField("label", 1, beginx+16, arr_middle[m]*jianxy+beginy-3, 0, 0); label.html = true; label.autoSize = "left"; label.htmlText = arr_name[arr_middle[m]]; var myformat:TextFormat = new TextFormat(); myformat.font = "Verdana"; myformat.size = 12; myformat.color = orderfontcolor; label.setTextFormat(myformat); } //--------------------------------------------------------------------- _root.createEmptyMovieClip(mcname+arr_middle[m]+"_mc",(5-m)*22+depth*10); //当前m应算为arr_middle[m]; drawCircle(this[mcname+arr_middle[m]+"_mc"], x0, y0, z, d, arr_a[arr_middle[m]][0], arr_a[arr_middle[m]][1], h, w, parseInt(arr_color[arr_middle[m]]), movew,alpha,mcalpha,arr_defaultstate[arr_middle[m]], arr_percent[arr_middle[m]],arr_name[arr_middle[m]],arr_showname[arr_middle[m]], titleline,linecolor,linealpha,fontcolor,percentshow,dark, this[mcname+arr_middle[m]+"icon_mc"]); this[mcname+arr_middle[m]+"_mc"]._alpha=mcalpha; //--------------------------------------------------------------------- //让点击竖向排列时的效果和点击pie时一样。 if(showorder){ mc.onRelease = this[mcname+arr_middle[m]+"_mc"].onRelease; } } } /* mc为影片名。 x0，y0圆心坐标；w1，w2为长短轴；a0为开始度数，a为结束度数，h为高, hw为环宽，color为十六进制颜色, movew为移动距离,alpha为透明度（点击之后），mcalpha为原始透明度,movenow为确定默认载入时是否移动出去， valuepercent为百分比值，arr_name为每项名称，arr_showname确定是否显示名称与值， titleline显示名称与值的长短位置，linecolor指示线颜色,linealpha指示线透明度，fontcolor文字颜色，percentshow是否显示百分比值，dark深色系数(>1如1.43) 本pie对应竖向排列方块mc名。 */ function drawCircle(mc:MovieClip, x0:Number, y0:Number, w1:Number, w2:Number, a0:Number, a:Number, h:Number, hw:Number, color:Number, movew:Number, alpha:Number, mcalpha:Number, movenow:String, valuepercent:Number, arr_name:String, arr_showname:String, titleline:Number, linecolor:Number,linealpha:Number, fontcolor:Number,percentshow:String,dark:Number, ordermc:MovieClip):Void { //加减间隔度 step = 1; //求内长短轴 leichang = w1-hw; leiduan = w2-(hw*w2/w1); //深色 hicolor = darkcolor(color,dark); //--------------------------------- //下面为下面环; mc.beginFill(color, 100); //mc.lineStyle(1, color, 100, false, "none"); //外边 mc.moveTo(getPoint(x0, y0+h, w1, w2, a0).x, getPoint(x0, y0+h, w1, w2, a0).y); k = a0; while (k<a) { k += step; mc.lineTo(getPoint(x0, y0+h, w1, w2, k).x, getPoint(x0, y0+h, w1, w2, k).y); } //侧边1 mc.lineTo(getPoint(x0, y0+h, leichang, leiduan, k).x, getPoint(x0, y0+h, leichang, leiduan, k).y); //内边 while (k>a0) { k -= step; mc.lineTo(getPoint(x0, y0+h, leichang, leiduan, k).x, getPoint(x0, y0+h, leichang, leiduan, k).y); } //侧边2 mc.lineTo(getPoint(x0, y0+h, leichang, leiduan, a0).x, getPoint(x0, y0+h, leichang, leiduan, a0).y); mc.endFill(); //-------------------------------- //下边高 //下边外侧边高 if(a0<=0 && a>=0 && a<=180){ //解决90度时外侧面，显示事实为90度，实际为0度，因为我们整个旋转了-90度； mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0+h, w1, w2, a0).x, getPoint(x0, y0+h, w1, w2, a0).y); k=a0; while (k<0) { k += step; mc.lineTo(getPoint(x0, y0+h, w1, w2, k).x, getPoint(x0, y0+h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, 0).x, getPoint(x0, y0, w1, w2, 0).y); while (k>a0){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0+h, w1, w2, 0).x, getPoint(x0, y0+h, w1, w2, 0).y); k=0; while (k<a) { k += step; mc.lineTo(getPoint(x0, y0+h, w1, w2, k).x, getPoint(x0, y0+h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, a).x, getPoint(x0, y0, w1, w2, a).y); while (k>0){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); }else if(a>=180 && a0<=180 && a0>=0){ //解决180度时外侧面，显示事实为270度，实际为180度，因为我们整个旋转了-90度； mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0+h, w1, w2, a0).x, getPoint(x0, y0+h, w1, w2, a0).y); k=a0; while (k<180) { k += step; mc.lineTo(getPoint(x0, y0+h, w1, w2, k).x, getPoint(x0, y0+h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, 180).x, getPoint(x0, y0, w1, w2, 180).y); while (k>a0){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0+h, w1, w2, 180).x, getPoint(x0, y0+h, w1, w2, 180).y); k=180; while (k<a) { k += step; mc.lineTo(getPoint(x0, y0+h, w1, w2, k).x, getPoint(x0, y0+h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, a).x, getPoint(x0, y0, w1, w2, a).y); while (k>180){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); }else if(a0<=0 && a>=180){ //解决同时处于0度和180度的情况 mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0+h, w1, w2, a0).x, getPoint(x0, y0+h, w1, w2, a0).y); k=a0; while (k<0) { k += step; mc.lineTo(getPoint(x0, y0+h, w1, w2, k).x, getPoint(x0, y0+h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, 0).x, getPoint(x0, y0, w1, w2, 0).y); while (k>a0){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0+h, w1, w2, 0).x, getPoint(x0, y0+h, w1, w2, 0).y); k=0; while (k<180) { k += step; mc.lineTo(getPoint(x0, y0+h, w1, w2, k).x, getPoint(x0, y0+h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, 180).x, getPoint(x0, y0, w1, w2, 180).y); while (k>0){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0+h, w1, w2, 180).x, getPoint(x0, y0+h, w1, w2, 180).y); k=180; while (k<a) { k += step; mc.lineTo(getPoint(x0, y0+h, w1, w2, k).x, getPoint(x0, y0+h, w1, w2, k).y); } mc.lineTo(getPoint(x0, y0, w1, w2, a).x, getPoint(x0, y0, w1, w2, a).y); while (k>180){ k -=step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); }else{ mc.beginFill(hicolor, 100); mc.moveTo(getPoint(x0, y0+h, w1, w2, a0).x, getPoint(x0, y0+h, w1, w2, a0).y); k = a0; while (k<a) { k += step; mc.lineTo(getPoint(x0, y0+h, w1, w2, k).x, getPoint(x0, y0+h, w1, w2, k).y); } //mc.lineTo(getPoint(x0, y0+h, w1, w2, a).x, getPoint(x0, y0+h, w1, w2, a).y); mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); while (k>a0) { k -= step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } mc.endFill(); } //下边开始侧面高 mc.beginFill(hicolor, 100); //mc.lineStyle(1, hicolor, 100, false, "none"); mc.moveTo(getPoint(x0, y0+h, w1, w2, a0).x, getPoint(x0, y0+h, w1, w2, a0).y); mc.lineTo(getPoint(x0, y0+h, leichang, leiduan, a0).x, getPoint(x0, y0+h, leichang, leiduan, a0).y); mc.lineTo(getPoint(x0, y0, leichang, leiduan, a0).x, getPoint(x0, y0, leichang, leiduan, a0).y); mc.lineTo(getPoint(x0, y0, w1, w2, a0).x, getPoint(x0, y0, w1, w2, a0).y); mc.endFill(); //下面结束侧面高 mc.beginFill(hicolor, 100); //mc.lineStyle(1, hicolor, 100, false, "none"); mc.moveTo(getPoint(x0, y0+h, w1, w2, a).x, getPoint(x0, y0+h, w1, w2, a).y); mc.lineTo(getPoint(x0, y0+h, leichang, leiduan, a).x, getPoint(x0, y0+h, leichang, leiduan, a).y); mc.lineTo(getPoint(x0, y0, leichang, leiduan, a).x, getPoint(x0, y0, leichang, leiduan, a).y); mc.lineTo(getPoint(x0, y0, w1, w2, a).x, getPoint(x0, y0, w1, w2, a).y); mc.endFill(); //下面内侧面高 mc.beginFill(hicolor, 100); //mc.lineStyle(1, hicolor, 100, false, "none"); mc.moveTo(getPoint(x0, y0+h, leichang, leiduan, a0).x, getPoint(x0, y0+h, leichang, leiduan, a0).y); k = a0; while (k<a) { k += step; mc.lineTo(getPoint(x0, y0+h, leichang, leiduan, k).x, getPoint(x0, y0+h, leichang, leiduan, k).y); } mc.lineTo(getPoint(x0, y0, leichang, leiduan, k).x, getPoint(x0, y0, leichang, leiduan, k).y); while (k>a0) { k -= step; mc.lineTo(getPoint(x0, y0, leichang, leiduan, k).x, getPoint(x0, y0, leichang, leiduan, k).y); } mc.endFill(); //--------------------------------- //下面为上面环; mc.beginFill(color, 100); //mc.lineStyle(1, color, 100, false, "none"); //外边 mc.moveTo(getPoint(x0, y0, w1, w2, a0).x, getPoint(x0, y0, w1, w2, a0).y); k = a0; while (k<a) { k += step; mc.lineTo(getPoint(x0, y0, w1, w2, k).x, getPoint(x0, y0, w1, w2, k).y); } //侧边1 mc.lineTo(getPoint(x0, y0, leichang, leiduan, k).x, getPoint(x0, y0, leichang, leiduan, k).y); //内边 while (k>a0) { k -= step; mc.lineTo(getPoint(x0, y0, leichang, leiduan, k).x, getPoint(x0, y0, leichang, leiduan, k).y); } //侧边2 mc.lineTo(getPoint(x0, y0, leichang, leiduan, a0).x, getPoint(x0, y0, leichang, leiduan, a0).y); mc.endFill(); //--------------------------------------显示名称与值 if(arr_showname=="true"){ mc.beginFill(color, 100); mc.lineStyle(1, linecolor, linealpha); mc.moveTo(getPoint(x0, y0, w1, w2, a0+(a-a0)/2).x,getPoint(x0, y0, w1, w2, a0+(a-a0)/2).y); mc.lineTo(getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).x,getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).y); mc.endFill(); //trace(mc._name+":"+(a0+(a-a0)/2)); if(a0+(a-a0)/2>0 && a0+(a-a0)/2<90){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).x, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).y, 0, 0); label.autoSize = "left"; }else if(a0+(a-a0)/2>90 && a0+(a-a0)/2<180){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).x, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).y, 0, 0); label.autoSize = "right"; }else if(a0+(a-a0)/2>180 && a0+(a-a0)/2<270){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).x, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).y-18, 0, 0); label.autoSize = "right"; }else if(a0+(a-a0)/2>-90 && a0+(a-a0)/2<0){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).x, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).y-18, 0, 0); label.autoSize = "left"; }else if(a0+(a-a0)/2==0){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).x, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).y-9, 0, 0); label.autoSize = "left"; }else if(a0+(a-a0)/2==90){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).x, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).y, 0, 0); label.autoSize = "center"; }else if(a0+(a-a0)/2==180){ var label:TextField = mc.createTextField("label", 1, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).x, getPoint(x0, y0, w1+titleline, w2+(w2*titleline)/w1, a0+(a-a0)/2).y-9, 0, 0); label.autoSize = "right"; } label.html = true; if(percentshow=="all"){ label.htmlText = arr_name+"："+valuepercent+"%"; }else if(percentshow=="font"){ label.htmlText = arr_name; }else if(percentshow=="num"){ label.htmlText = valuepercent+"%"; } var myformat:TextFormat = new TextFormat(); myformat.font = "Verdana"; myformat.size = 12; myformat.color = fontcolor; label.setTextFormat(myformat); label.gridFitType = "pixel"; label.antiAliasType = "advanced"; label.sharpness = -400; } //-------------------------------------- //点击移动 mc.onRelease = function(){ //移动方向：度数： go_a = a0+(a-a0)/2; //移动距离 go_w = movew; //trace(this._name); //trace(this.enabled); if(mc._x!=0 || mc._y!=0){ myTweeen3=new Tween(mc,"_x",Bounce.easeOut,mc._x,(mc._x - (getPoint(x0,y0,go_w,go_w,go_a).x-x0)),1.5,true); myTweeen4=new Tween(mc,"_y",Bounce.easeOut,mc._y,(mc._x - (getPoint(x0,y0,go_w,go_w,go_a).x-x0)),1.5,true); //透明度 myTweeenalpha2=new Tween(mc,"_alpha",Regular.easeOut,mc._alpha,mcalpha,1,true); var listener3:Object = new Object(); mc.enabled = false; ordermc.enabled = false;//竖向排列本pie对应的方块mc listener3.onMotionFinished = function(){ mc.enabled = true; ordermc.enabled = true;//竖向排列本pie对应的方块mc } myTweeen3.addListener(listener3); //mc._x = mc._x - (getPoint(x0,y0,go_w,go_w,go_a).x-x0); //mc._y = mc._y - (getPoint(x0,y0,go_w,go_w,go_a).y-y0); }else{ //到达新点 myTweeen1=new Tween(mc,"_x",Regular.easeOut,mc._x,(getPoint(x0,y0,go_w,go_w,go_a).x-x0),1,true); myTweeen2=new Tween(mc,"_y",Regular.easeOut,mc._y,(getPoint(x0,y0,go_w,go_w,go_a).y-y0),1,true); //透明度 myTweeenalpha=new Tween(mc,"_alpha",Regular.easeOut,mc._alpha,alpha,1,true); var listener1:Object = new Object(); mc.enabled = false; ordermc.enabled = false;//竖向排列本pie对应的方块mc listener1.onMotionFinished = function(){ mc.enabled = true; ordermc.enabled = true;//竖向排列本pie对应的方块mc } myTweeen1.addListener(listener1); } //trace(this.getDepth()); } //默认位置（移动） if(movenow=="true"){ //移动方向：度数： go_a = a0+(a-a0)/2; //移动距离 go_w = movew; myTweeen5=new Tween(mc,"_x",Regular.easeOut,mc._x,(getPoint(x0,y0,go_w,go_w,go_a).x-x0),1,true); myTweeen6=new Tween(mc,"_y",Regular.easeOut,mc._y,(getPoint(x0,y0,go_w,go_w,go_a).y-y0),1,true); //透明度 myTweeenalpha=new Tween(mc,"_alpha",Regular.easeOut,mc._alpha,alpha,1,true); var listener5:Object = new Object(); mc.enabled = false; ordermc.enabled = false;//竖向排列本pie对应的方块mc listener5.onMotionFinished = function(){ mc.enabled = true; ordermc.enabled = true;//竖向排列本pie对应的方块mc } myTweeen5.addListener(listener5); } } /*-------------------------------------------------------------------------------------------- x=a*cosX //x、y是椭圆上一点的坐标；a、b分别是长、短轴 y=b*sinX //X是椭圆旋转的角度。计算椭圆上点的位置函数，x0，y0为圆心；w，h为长短轴；a为度数。返回一个坐标对象，有x和y两个属性。 */ function getPoint(x0:Number, y0:Number, w:Number, h:Number, a:Number):Object { a = a*Math.PI/180; return {x:Math.cos(a)*w+x0, y:Math.sin(a)*h+y0}; } //-------------------------------------------------------------------------------------- /*-------------------------------------------------------------------------------------------- 将颜色加深原有颜色oldcolor为十六进表示法如：0xff6600;返回同样类型的值 */ function darkcolor(oldcolor:Number,dark:Number):Number{ //求暗色 if(oldcolor.toString(16).length<6){//防止这个十六进制数的第一位为0; r = parseInt("0x0"+substring(oldcolor.toString(16), 0, 1)); g = parseInt("0x"+substring(oldcolor.toString(16), 2, 2)); b = parseInt("0x"+substring(oldcolor.toString(16), 4, 2)); }else{ r = parseInt("0x"+substring(oldcolor.toString(16), 0, 2)); g = parseInt("0x"+substring(oldcolor.toString(16), 3, 2)); b = parseInt("0x"+substring(oldcolor.toString(16), 5, 2)); } //trace("原始rgb:"+r+":"+g+":"+b); //dark = 1.43; r=Math.round(r/dark).toString(16); g=Math.round(g/dark).toString(16); b=Math.round(b/dark).toString(16); //trace("新rgb:"+r+":"+g+":"+b); r.length==1 ? r="0"+r:r; g.length==1 ? g="0"+g:g; b.length==1 ? b="0"+b:b; var hicolor:Number; hicolor = parseInt("0x"+r.toString(16)+""+g.toString(16)+""+b.toString(16)); r = parseInt("0x"+substring(hicolor.toString(16), 0, 2)); g = parseInt("0x"+substring(hicolor.toString(16), 3, 2)); b = parseInt("0x"+substring(hicolor.toString(16), 5, 2)); return hicolor; }
[Ctrl+A 全部选择然后拷贝]

源文件打包下载
flashpie.rar